HP B4250, Snapon EAZ0012L02A manual Okidata B4400 Printer Instructions, Installation Overview

Model: EAZ0012L02A

Okidata B4400

Printer Instructions

Page: 1 of 16

Installation Instructions

IT IS RECOMMENDED THAT THIS BE PERFORMED

BY A

QUALIFIED SNAP-ON EQUIPMENT TECHNICIAN

INSTALLATION OVERVIEW:______________________________________________

These instructions are for the installation of an Off-the-Shelf Oki B4400 printer for all OBIS Analyzers, SIS Machine Bar 97 Analyzers, Sun Machines and MCS-2500 for Pep Boy units. When installing this new printer a Utility Disk, will be needed to configure the Oki B4400 printers to work correctly with SIS analyzers & Sun Machine Analyzers.

NOTE: A SEPARATE SHEET METAL DRAWER KIT (EAK0226L00A) MAY BE REQUIRED, WHEN

REPLACING AN EXISTING OKIDATA 6E, 10E OR 14E PRINTER WITH AN OKI B4400 PRINTER.

ORDER AND INSTALL THIS KIT FIRST, BEFORE CONTINUING. THIS KIT IS NOT REQUIRED IF AN OKIDATA B4200, B4250 OR B4400 PRINTER WAS PREVIOUSLY INSTALLED.

NOTE: THE OKIDATA B4400 PRINTER IS ONLY APPROVED FOR THE FOLLOWING STATE EMISSIONS BELOW:

OBIS North Carolina

OBIS Pennsylvania

OBIS Texas

Virginia BAR-97

California BAR-97

Texas ASM BAR-97

New Jersey BAR-97

Ontario BAR-97 (GAS)

Ontario BAR-97 (HD)

Pennsylvania BAR-97

PARTS NEEDED FOR INSTALLATION (may need to be ordered separately): ____________

PART NUMBER	DESCRIPTION	QTY
3-03306A25	Oki B4400 LED Printer	1
3-13926AUSD3	Printer Utility Disk	1
EAZ0012L02A	Installation Instructions	1

EAZ0012L02A (01/16/2008) REV A.