Page 8 of 16
24.From the desktop, select Start ⇒ Programs ⇒ MS DOS Prompt.
25.At the DOS prompt type $ ?6QDSRQ and press <ENTER>.
26.A message indicating 1 file copied should be displayed, if not you are not in the correct drive or the floppy disk is bad, verify the problem and retry running the Snapon batch file.
27.Exit the DOS window by typing H[LW at the DOS prompt and press <ENTER>.
28.Click on “Sun Machine Analyzer” in the Sun Machine Tool Box.
29.Click on <Continue> after calibration.
30.Select <Utilities> from the top menu bar.
31.Select <Tester Setup>, and then select <Printer Type>.
32.Select “Laser Jet 4”.
33.Close “Utilities”.
34.To make sure the new settings take effect you will need to reboot your unit. Reboot the unit by selecting Start ⇒ Shut down ⇒ Shut down the computer ⇒ Yes.
PRINTER INSTALLATION COMPLETE FOR OKI B4400 PRINTER ON SIS MACHINE WITH SUN MACHINE SOFTWARE VERSION