Page 10 of 16
OKI B4400 PRINTER on MCS 2500 Pep Boys: _______________________________
NOTE: A SEPARATE SHEET METAL DRAWER KIT (EAK0226L10A) IS REQUIRED, WHEN REPLACING
AN EXISTING OKI 6E; OKI 10E OR OKI 14E PRINTER WITH AN OKI B4400 PRINTER.
ORDER AND INSTALL THIS KIT FIRST, BEFORE CONTINUING. THIS KIT IS NOT REQUIRED IF AN OKIDATA B4200, B4250 OR B4400 PRINTER WAS PREVIOUSLY INSTALLED.
1.Remove the defective printer and unplug the AC power supply cord and data cable attached to the back of the printer.
2.Unpack the new Oki B4400 printer from the box, and follow the Okidata instructions for proper setup of the toner.
3.Install the Oki B4400 Printer into the unit. Connect the existing data cable and AC Power cable to the Oki B4250 printer. Turn on the power switch on the side of the printer.
NOTE: ENSURE THE PRINTER IS TURNED ON (1) POSITION AND CONNECTED TO THE COMPUTER VIA THE PARALLEL PORT CONNECTION.
4.Power up the analyzer.
5.Click on <Continue> after calibration.
6.Select <Utilities> from the top menu bar.
7.Select <Tester Setup>, and then select “Printer Type”.
8.Select “Laser Jet 4”.
9.Press <ESC> key; Select “Save…” to save the new settings.
PRINTER INSTALLATION COMPLETE FOR
OKI B4400 PRINTER ON
MCS 2500 PEP BOYS