HP SecureDIMM II manual

Page 9

Installing the

Capella Technologies Secure Level II Driver

for Windows 2000 ®

This section outlines the installation process for the Capella Technologies Secure Level 2 Printer Driver for the Microsoft Windows 2000 Operating System.

Important: Install the DIMM containing the Capella Technologies Secure Level 2 Firmware in your printer before beginning the software installation.

The software installation is performed in three phases:

1.Install the Standard HP LaserJet 4100 Drivers.

2.Install the RedMon Port Monitor and Capella Encryption Filter.

3.Install the Encrypted Printer Driver.

The remainder of this document details the driver installation process.

9

Image 9
Contents User’s Guide Page DIMM-SOFTWARE License Agreement Limitedwarranty Contents Introduction Page Installing the SecureDIMM Board Page Installing the Standard HP LaserJet 4100 Drivers Page Page Page Page Page Page Type C\Capella Tech\RedMon15.exe and press the Enter key Type C\Capella Tech\setup.exe and press the Enter key Installing the Encrypted Printer Driver Page Otherwise,selecttheEncrypted entry in the Use the following Page Page AesCrypt Utility Page Additional Technical Information