Installing the SecureDIMM Board

Your HP LaserJet has Dual Inline Memory Module (DIMM) slots. The Capella Technolo- gies SecureDIMM can be installed in any of these slots. The SecureDIMM is installed exactly like a memory DIMM module. For instructions on how to install the SecureDIMM please reference the adding memory section of your printers HP LaserJet Printer User’s Manual.

CAUTION:

DIMM modules can be damaged by small amounts of static electricity. Wear an antistatic strap (or frequently touch the surface of the antistatice bag or bare metal of the printer) when handling the board, and before installing or removing it.

WARNING:

Before installing the DIMM board turn the printer off and unplug the power cord. Hazard- ous voltages are present in the printer.

NOTE:

The Capella Security module is a PCL Printer Personality (firmware). A conflict may occure if another DIMM with PCL Printer Personality is installed.

Testing the SecureDIMM II

1.Press [Menu] to the right until Information Menu appears.

2.Press [Item] until Print Configuration appears

3.Press [Select]

4.A Capella Technologies Firmware Page should print

5.Double click on the file Capspool.exe on the test diskette

6.Select the drive where the Test.prn file is located (bottom of the screen)

7.Select the printer you wish to print to (top of the screen)

8.Click on the file CryptTst.prn

9.Click on the box “Or Click Here”

10.A picture of a Volwagon Bug Should print

11.Installation is complete