HP SecureDIMM II manual

Page 25

Copying Encrypted Files to a Printer

Once an encrypted print job has been created, it needs to be sent to a printer. The exact details of this process will vary from installation to installation. What follows are some general guidelines.

Microsoft DOS or Windows Command Line Environments

After aesCrypt has created the encrypted job file, the copy command may be used to send the file to a printer. The following examples assume the encrypted job has been placed in a file called encrypted.prn:

The command

copy /b encrypted.prn lpt1:

will copy the encrypted file to a printer attached to a local parallel port or a port that has been "captured" by a network printer. The /b switch is required to insure that a "binary", not a standard "text", copy is performed.

The command

copy /b encrypted.prn \\10.0.0.224\lj4100

will copy the encrypted file to the printer share named lj4100 on the computer at IP address 10.0.0.224. The computer's network name may, and probably should, be used instead of its IP address. Note that this printer share must not be running an encrypting printer driver because the printer would be unable to decrypt the doubly encrypted file.

Microsoft Windows Graphical Environment

The aesCrypt utility may be incorporated directly into the printer driver when running under Microsoft Windows. Contact Capella Technologies for more information.

UNIX and Linux Environments

The aesCrypt utility is available for several UNIX and Linux environments. Contact Capella Technologies for more information.

2 5

Image 25
Contents User’s Guide Page DIMM-SOFTWARE License Agreement Limitedwarranty Contents Introduction Page Installing the SecureDIMM Board Page Installing the Standard HP LaserJet 4100 Drivers Page Page Page Page Page Page Type C\Capella Tech\RedMon15.exe and press the Enter key Type C\Capella Tech\setup.exe and press the Enter key Installing the Encrypted Printer Driver Page Otherwise,selecttheEncrypted entry in the Use the following Page Page AesCrypt Utility Page Additional Technical Information