Soleus Air SG-WAC-12HCE Installation & Assembly Instructions, Window Preparation

Page 6

INSTALLATION & ASSEMBLY INSTRUCTIONS

Window Preparation

Please read all instructions prior to installing your air conditioner. Two people are recommended to install this product. If a new electrical outlet is required, have the outlet installed by a qualified electrician before installing the unit.

Before installing the unit, check the dimensions of your window to make sure the air conditioner will fit. This unit is made to fit inside a standard double-hung window. Make sure the window is in good shape and able to firmly hold the needed screws. If not, make repairs prior to installing the unit.

Model

SG-WAC-12HCE

 

 

Unit Height

15 3/8”

 

 

Unit Width

22 5/8”

 

 

Min. Window Opening Height

16 1/4”

 

 

Min. Window Width

27”

 

 

Max Window Width

39”

 

 

Storm Window Requirements

A storm window frame will not allow the air conditioner to tilt properly which in turn will keep it from draining properly. To adjust for this, attach a board or piece of wood to the sill. The board or wood piece should have a depth of at least 1 1/2”. Make sure the board or piece of wood is approximately 1/2” higher than the storm window frame. This will allow the air conditioner to tilt enough for proper drainage. (See FIG. 2).

FIG. 1

SASH

Storm window frame or obstruction

FIG. 2

Storm window frame or obstruction

SASH

Board or wood piece must be approximately 1/2” higher than the storm window frame for proper drainage

Prior to Installing the Air Conditioner

1.Check for anything that could block airflow. Check the area outside of the window for things such as shrubs, trees, or awnings. Check the inside area to make sure curtains, drapes, or blinds will not prevent proper airflow.

2.Check the available electrical outlet. The power supply must be the same as shown on the unit serial nameplate (located on the left side of the unit, near the front faceplate). Be sure the outlet is close enough for the power cord to reach.

3.Carefully unpack the air conditioner. Remove all packing material and make sure the floor is protected when remov- ing. Due to the large size of this air conditioner, two people should move the unit together.

When handling the unit, be careful to avoid cuts from the sharp metal edges and aluminum fins on the front and rear coils.

6

Image 6
Contents SG-WAC-12HCE Important Safety Instructions Lcdi Power Cord and Plug Electrical RequirementsRecommended Ground Method Parts List Tools Needed Location RequirementsSpecifications ModelWindow Preparation Installation & Assembly InstructionsPrior to Installing the Air Conditioner Storm Window RequirementsInstallation & Assembly Instructions Window Mounting Remove ChassisInstallation & Assembly Instructions Window Mounting Placing the Cabinet Inside the Window Assembly & InstallationTop Angle Rail and Side Bracket Installation Foam Gasket and TopInstall the Window Lock and Sash Seal Extend the Accordion PanelsSelect the Wall Location THRU-THE-WALL InstallationInstalling the Chassis into the Cabinet Prepare the WallAssembly & Installation THRU-THE-WALL Prepare and Install the CabinetMasonry Construction Support Bracket Wooden StripRemote Control Using Your AIR ConditionerElectronic Control Panel & Remote Control Normal Operating SoundsUsing Your AIR Conditioner Using Your AIR Conditioner Cabinet Cleaning Care and CleaningAir Filter Cleaning Winter StorageTroubleshooting Water is dripping outside Water is dripping inside the roomWater collects in the base pan Warranty One Year Limited Warranty
Related manuals
Manual 20 pages 12.18 Kb

SG-WAC-12HCE specifications

The Soleus Air SG-WAC-12HCE is a powerful and efficient window air conditioning unit designed to provide a comfortable indoor climate even during the hottest summer months. With its sleek design and effective cooling capabilities, this air conditioner has gained popularity among consumers looking for reliability and performance.

One of the standout features of the Soleus Air SG-WAC-12HCE is its 12,000 BTU cooling capacity, making it suitable for medium to large rooms up to 550 square feet. This powerful cooling performance is complemented by a dehumidification mode, which can remove up to 3.5 pints of moisture per hour. This combination ensures that not only is the air cooled down but also makes it less humid, providing a more comfortable living environment.

Energy efficiency is another primary characteristic of the SG-WAC-12HCE. With an Energy Efficiency Ratio (EER) of 12.0, this unit is designed to reduce energy consumption while delivering optimal cooling performance. This feature is essential for those looking to keep energy bills in check while maintaining a pleasant indoor atmosphere. The unit is also ENERGY STAR certified, demonstrating its commitment to minimal environmental impact.

The Soleus Air SG-WAC-12HCE comes equipped with an array of user-friendly controls. It features an intuitive remote control, allowing users to adjust the temperature settings, fan speeds, and modes from the comfort of their couch or bed. The electronic controls include a digital display, making it easier to monitor and set the desired cooling levels accurately.

Additionally, this air conditioner offers three cooling speeds and three fan-only speeds, giving users the flexibility to customize their comfort level based on personal preferences and varying weather conditions. The unit also features a programmable 24-hour timer, which allows for scheduled operation, ensuring the air conditioner only runs when needed.

Installation of the SG-WAC-12HCE is straightforward, thanks to the included window installation kit, which makes it compatible with most standard window sizes. Overall, the Soleus Air SG-WAC-12HCE is a feature-rich window air conditioning unit that excels in cooling efficiency, user convenience, and versatility, making it an exceptional choice for consumers looking to stay cool and comfortable.