Soleus Air SG-WAC-25HCE manual THRU-THE-WALL Installation, Installing the Chassis into the Cabinet

Page 11

ASSEMBLY & INSTALLATION (CONT.)

Installing the Chassis into the Cabinet

1.Team lift (two people) the air conditioner chassis and carefully slide it into the cabinet. Let the front of the air conditioner hang out approximately 6”.

2.CAUTION: DO NOT PUSH ON THE CONTROLS OR FINNED COILS.

3.Be sure the chassis is firmly seated in the back of the cabinet.

4.Insert all screws removed during window installation and reattach the front face plate, front panel, and the air filter. Use the REMOVE CHASSIS instructions and figures 1-6 for reference.

THRU-THE-WALL INSTALLATION

NOTE: Consult local building codes prior to installation and/or a qualified carpenter.

Select the Wall Location

This air conditioner has a slide-out chassis, so that it can be installed through an outside wall as specified below:

MAX WALL THICKNESS: 8 1/4”

IMPORTANT: The side louvers must never be blocked.

NOTE: All parts needed for Thru-The-Wall Installation are provided, except a wood frame, shims, and 10 wood screws (10-1” long minimum). Select a wall surface that:

1.Does not support major structural loads such as the frame construction at ends of windows, and under truss-bearing points, etc.

2.Does not have plumbing or wiring inside.

3.Is near existing electrical outlets, or where another out- let can or will be installed.

4.Does not have objects blocking the air vents which limits cooling.

5.Allows unblocked airflow from the rear and sides of the air conditioner.

Prepare the Wall

1.Prepare the wall in frame construction (including brick and stucco veneer). Working from inside the room, find the wall stud that is nearest the center of the installa- tion area.

2.Cut a hole on each side of the center stud.

3.Measure between the inside edges of every other stud as shown below.

FIG. 1

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents SG-WAC-25HCE Important Safety Instructions Recommended Ground Method Lcdi Power Cord and PlugElectrical Requirements Non-Hardware Packing List Parts List Tools NeededModel SpecificationsDisclaimer Storm Window Requirements Installation & Assembly InstructionsPrior to Installing the Air Conditioner Window PreparationRemove Chassis Installation & Assembly Instructions Window MountingInstallation & Assembly Instructions Window Mounting Placing the Cabinet Inside the Window Assembly & InstallationTop Angle Rail and Side Bracket Installation TOP ViewMark Install Support BracketsInstall the Window Lock and Sash Seal Extend the Accordion PanelsPrepare the Wall THRU-THE-WALL InstallationInstalling the Chassis into the Cabinet Select the Wall LocationPrepare and Install the Cabinet Assembly & Installation THRU-THE-WALLSupport Bracket Wooden Strip Masonry ConstructionNormal Operating Sounds Using Your AIR ConditionerElectronic Control Panel & Remote Control Remote ControlUsing Your AIR Conditioner Using Your AIR Conditioner Winter Storage Care and CleaningAir Filter Cleaning Cabinet CleaningProblem Possible Causes Solutions TroubleshootingWater collects in the base pan Water is dripping outsideWater is dripping inside the room One Year Limited Warranty Warranty

SG-WAC-25HCE specifications

The Soleus Air SG-WAC-25HCE is a prominent air conditioning unit that effectively combines innovative features with user-friendly technology to deliver superior cooling performance. This window air conditioning unit is designed to keep rooms cool and comfortable, making it ideal for residential settings, small offices, or any space requiring efficient climate control.

One of the main features of the Soleus Air SG-WAC-25HCE is its cooling capacity. With a powerful output of 25,000 BTUs, it is capable of cooling spaces of up to 1,500 square feet, ensuring that even larger rooms can maintain a comfortable temperature during peak summer months. It is equipped with three cooling and fan speeds, allowing users to customize the airflow according to their preferences and needs.

The unit incorporates eco-friendly refrigerant R32, which not only helps reduce environmental impact but also enhances cooling efficiency. The innovative design of the SG-WAC-25HCE ensures that it operates with minimal noise, providing a peaceful environment for activities such as sleeping, working, or relaxation.

Another notable technology featured in the Soleus Air SG-WAC-25HCE is its advanced digital thermostat. The unit allows for precise temperature control, and the remote control feature provides added convenience, letting users adjust settings from across the room. The programmable timer enhances energy efficiency by allowing users to set the air conditioning to operate at specific times, effectively reducing electricity consumption when the space is unoccupied.

The air conditioning unit also features a dehumidification mode, which can remove excess moisture from the air, creating a more comfortable indoor environment during humid conditions. The auto-restart function ensures that the system resumes operation after a power outage, maintaining comfort without the need for manual intervention.

Installation and maintenance of the Soleus Air SG-WAC-25HCE are straightforward, as the unit is designed to fit standard window frames. The washable, reusable air filter makes upkeep easy, ensuring that the air quality remains high and the system operates efficiently.

In summary, the Soleus Air SG-WAC-25HCE blends powerful cooling capability, eco-friendly technology, user-friendly features, and efficient operation, making it a smart choice for anyone seeking reliable air conditioning solutions for larger spaces. With its advanced functionalities and ease of use, it stands out as an excellent air conditioning option in the modern market.
Top Page Image Contents