Soleus Air SG-WAC-25HCE manual Masonry Construction, Support Bracket Wooden Strip

Page 13

ASSEMBLY & INSTALLATION - THRU-THE-WALL (CONT.)

Refer to the SUPPORT BRACKET ASSEMBLY in the WINDOW MOUNTING section to assemble the support brackets. A wooden strip nailed to the outside wall should be used in conjunction with the angled sill support brack- ets.

FIG. 3

Support

Bracket

Wooden Strip

5.Screw or nail the cabinet to the wooden frame using shims if the frame is oversized, to eliminate possible noise. Remember to maintain proper slope for water elimination.

FIG. 4

MASONRY CONSTRUCTION

1.Cut or build a wall opening in the masonry wall similar to the frame construction (refer to the THRU-THE- WALL installation for a wall thickness greater than 8 1/2”)..

2.Secure the cabinet in place using masonry nails, or masonry anchor screws. Or, build a frame using the instructions found in the THRU-THE-WALL installation section.

3.Make sure the masonry above the cabinet is supported well. Use the existing holes in the cabinet or additional drilled holes to fasten the cabinet at various positions.

Make sure that the side louvers are clear of any ob- structions.

4.Install the exterior cabinet support brackets according to the SUPPORT BRACKET INSTALLATION instruc- tions in the THRU-THE-WALL installation section.

Caulk or flash with aluminum if needed. This will pro- vide a tight seal around the top and sides of the cabi- net.

5.For a more aesthetically pleasing installation, apply wood trim molding around the sides of the cabinet with- out obstructing the side louvers.

6.Install the chassis into the cabinet by following the steps described in the WINDOW MOUNTING section.

OPTIONAL: Caulking and installation of the trim on the interior wall may be done if desired. Caulk the openings around the top and sides of the cabinet and all sides of the wood sleeve to the opening.

NOTE: See the WINDOW MOUNTING instructions for the bottom rail seal location.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents SG-WAC-25HCE Important Safety Instructions Electrical Requirements Lcdi Power Cord and PlugRecommended Ground Method Non-Hardware Packing List Parts List Tools NeededDisclaimer SpecificationsModel Prior to Installing the Air Conditioner Installation & Assembly InstructionsWindow Preparation Storm Window RequirementsRemove Chassis Installation & Assembly Instructions Window MountingInstallation & Assembly Instructions Window Mounting Top Angle Rail and Side Bracket Installation Assembly & InstallationTOP View Placing the Cabinet Inside the WindowInstall the Window Lock and Sash Seal Install Support BracketsExtend the Accordion Panels MarkInstalling the Chassis into the Cabinet THRU-THE-WALL InstallationSelect the Wall Location Prepare the WallPrepare and Install the Cabinet Assembly & Installation THRU-THE-WALLSupport Bracket Wooden Strip Masonry ConstructionElectronic Control Panel & Remote Control Using Your AIR ConditionerRemote Control Normal Operating SoundsUsing Your AIR Conditioner Using Your AIR Conditioner Air Filter Cleaning Care and CleaningCabinet Cleaning Winter StorageProblem Possible Causes Solutions TroubleshootingWater is dripping inside the room Water is dripping outsideWater collects in the base pan One Year Limited Warranty Warranty

SG-WAC-25HCE specifications

The Soleus Air SG-WAC-25HCE is a prominent air conditioning unit that effectively combines innovative features with user-friendly technology to deliver superior cooling performance. This window air conditioning unit is designed to keep rooms cool and comfortable, making it ideal for residential settings, small offices, or any space requiring efficient climate control.

One of the main features of the Soleus Air SG-WAC-25HCE is its cooling capacity. With a powerful output of 25,000 BTUs, it is capable of cooling spaces of up to 1,500 square feet, ensuring that even larger rooms can maintain a comfortable temperature during peak summer months. It is equipped with three cooling and fan speeds, allowing users to customize the airflow according to their preferences and needs.

The unit incorporates eco-friendly refrigerant R32, which not only helps reduce environmental impact but also enhances cooling efficiency. The innovative design of the SG-WAC-25HCE ensures that it operates with minimal noise, providing a peaceful environment for activities such as sleeping, working, or relaxation.

Another notable technology featured in the Soleus Air SG-WAC-25HCE is its advanced digital thermostat. The unit allows for precise temperature control, and the remote control feature provides added convenience, letting users adjust settings from across the room. The programmable timer enhances energy efficiency by allowing users to set the air conditioning to operate at specific times, effectively reducing electricity consumption when the space is unoccupied.

The air conditioning unit also features a dehumidification mode, which can remove excess moisture from the air, creating a more comfortable indoor environment during humid conditions. The auto-restart function ensures that the system resumes operation after a power outage, maintaining comfort without the need for manual intervention.

Installation and maintenance of the Soleus Air SG-WAC-25HCE are straightforward, as the unit is designed to fit standard window frames. The washable, reusable air filter makes upkeep easy, ensuring that the air quality remains high and the system operates efficiently.

In summary, the Soleus Air SG-WAC-25HCE blends powerful cooling capability, eco-friendly technology, user-friendly features, and efficient operation, making it a smart choice for anyone seeking reliable air conditioning solutions for larger spaces. With its advanced functionalities and ease of use, it stands out as an excellent air conditioning option in the modern market.
Top Page Image Contents