INSTALLATION & ASSEMBLY INSTRUCTIONS
Some assembly is required for your new air conditioner. Please read and follow these instructions carefully.
1.This air conditioner is designed to be installed in a standard
2.The air conditioner can be installed without the accordion panels to fit in a narrow window opening. See the window dimensions.
3.The Lower Sash (the lower part of the window that moves up and down) must allow for 12.5” of vertical clearance when open. (See FIG. 1).
4.All supporting parts must be secured to firm wood, masonry, or metal.
5.The electrical outlet must be within reach of the power cord.
NOTE: Save the product packaging and installation instruc- tions for future reference. Store the air conditioner in the product box when not in use for an extended period of time.
Top Rail Assembly
The top rail must be assembled prior to installing the air conditioner in the window Tools Needed: Phillips Screw Driver
Top Rail Hardware | QTY | |
3/8” | 4 | |
Screw | ||
| ||
|
| |
Top | 1 | |
Panel | ||
| ||
|
|
Attaching the Top Rail to the Air Conditioner
1.Remove the air conditioner from the box and place on a hard flat surface.
2.Remove top rail from the bottom of the packaging material as shown in FIG. A
3.Align the hole in the top rail with those in the top of the unit as shown in FIG. B
4.Secure the top rail to the unit with the 3/8" Screws as shown in FIG. C
When handling the unit, be careful to avoid cuts from the sharp metal edges and aluminum fins on the front and rear coils.
Top Rail
Box
FIG. A
FIG. B
FIG. C
NOTE: For safety reasons, all 4 screws must be used to attach the top rail.
5