Unpacking the TowerFeed unit

UNPACKING

Note:

Prior to delivery your TowerFeed was thoroughly tested and care- fully packaged. Please check your unit for transportation damage and/or missing parts immediately upon receipt.

It is advisable to get a second person to help you unpack the unit.

Warning:

TowerFeed weighs up to 60 kilograms (130 pounds) depending on configuration. Enlist the help of a second person to lift and place the printer. To prevent back strain or injury, bend your knees when lifting the unit.

∙Cut the packing strips and remove the top of the shipping container.

∙Remove the two blue shock absorbers and the accessories box from the top of the unit (Fig. 3).

∙If TowerFeed is delivered with the optional stand for the 4-tray unit, remove the stand that is packed in front of TowerFeed (Fig. 4).

∙Enlist the help of another person and carefully lift TowerFeed out of the container (Fig. 5).

∙Remove the stretched plastic from TowerFeed. Be careful to not scratch the unit when using a cutting tool.

∙Insert the 4 rollers (from the accessories box) with some force onto the roller shafts of TowerFeed. They will snap into position with a noticeable click. Insert the 2 stoppable rollers on the left side (Fig. 7a) and the 2 non-stoppable ones on the right side of the unit (Fig. 7b).

Note:

When turning TowerFeed over on a side or its back, be careful to not scratch its housing. Use a piece of cardboard or the like to prevent the unit from scratches.

∙Remove the transportation inserts in the TowerFeed trays (as de- scribed in INSTALLATION)

Important:

It is recommended to keep the packaging material and inserts for proper protection of the unit and its parts in case of reshipment.

Fig. 3

Fig. 4

Fig. 5

Fig. 6

	Fig. 7	a
	Fig. 7	b
		b

IU 675 / 0150	4	TowerFeedTM for the HP LaserJet 9000