HP 9000 manual Hardware Installation, Positioning the Printer

INSTALLATION

Hardware Installation

Warning:

POWER OFF your printer and disconnect all power and interface cables before installing and/or servicing TowerFeed.

Positioning the Printer

∙Place the TowerFeed unit at the location you wish. Be sure to place it on a flat location.

∙Carefully put the printer unit onto TowerFeed. Rear, left and right fronts of the printer are aligned with the TowerFeed fronts. The positioning holes of the printer will match with the positioning pegs of the TowerFeed top (Fig. 9).

Warning:

1.The printer weighs up to 60 kilograms (130 pounds). Enlist the help of a second

person to lift the unit. To prevent back strain or injury, bend your knees when lifting the unit.

2.To lift the printer, use the handholds of

the printer. When lowering the printer, be careful to not damage the electrical connector or the gearing interface of TowerFeed (Fig. 9).

Caution:

When rolling TowerFeed and printer to another place, watch out when crossing doorsteps to not have the unit tipping over or TowerFeed trays sliding open.

Fig. 9 Positioning the printer on TowerFeed