Clear Vinyl Sheet

Considerations

∙ Supported (			) print modes and resolutions:

	1200x600			600x600				600x300

	HQ	Prod	BB	HQ	Prod	BB	HQ	Prod	BB

Recommendations for best results

Preparation

∙Dust with a lint-free cloth to remove any dust and handle with gloves to avoid fingerprints on edge of media

∙Use isopropyl alcohol to clean handling edges. Although not always visible, oils from fingers may still mar surface for printing.

∙Media is prone to static so it may benefit from wiping with anti-static device prior to printing.

Printing

∙High Quality 600x600 mode is recommended, but depending on ink coverage and image content, other supported modes may print acceptably.

∙Use low UV lamp setting.

∙Use the Media Wizard vacuum settings, increasing if necessary.

∙Use Polystyrene color profile, or Foamed PVC or a generic equivalent.

Output Handling

∙Adhesion may be poor on this media. Print in a higher quality mode, use a higher UV lamp power, and/or wait 24 hours before trimming to improve adhesion.

∙Always use a sharp blade when cutting and be aware that some ink flaking will occur in high ink load areas unless trimmed outside of the printed area.