HP FB950 manual 2010-09

Page 30

© Copyright 2010 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

2010-09

Image 30

Contents Media Usage on the Scitex FB950 Printer Page Table of Contents Page Print Mode Considerations IntroductionMedia Compatibility Flexible Media Media Type Supported Print Details ModesRigid Media Tests show reliable results with the following rigid mediaDetails on Specific Media Types Acrylic Sheet Plexiglas and other brand names∙ No special handling required Card Stock ∙ C-size flutes or smaller sizes perform bestClear Vinyl Sheet Corrugated Fiberboard Fluted Polypropylene Coroplast and other brand names Foam Board Fome-Corand other brand names Foamed PVC Sintra and other brand names Glass Petg Clear Plywood and Medium Density Overlay MDO Plywood Materials Polycarbonate Sheet Lexan, Makrolon, Tuffak Polystyrene Sheet Considerations Table Setup General RecommendationsMedia Feed Other Printer Configuration Notes Media PropertiesPrint Mode Selection Static ElectricityUsing the Straight-Through Media Path Loading MediaEdge-to-Edge Printing Media Measurement OptionsLoading Media for Edge-to-Edge Printing Overprinting Loading Media for Two-Sided Printing Two-Sided PrintingGeneral Notes Preparing Image for Two-Sided PrintingMultiple Sheet Printing MarginsUneven Rows 2010-09