HP embedded web Server 4650, embedded web Server 3700 manual To enable the AutoSend feature

AutoSend

Use the AutoSend page to send device configuration and supplies usage information periodically to Hewlett-Packard. This feature enables you to have a relationship with Hewlett-Packard that is designed to provide you with services that include but are not limited to proactive cartridge replacement, pay-per-page contracts, support agreements, and usage tracking. The following illustration, table, and procedure describe how to use this page.

1

2

4

3

Callout	Area on the page	Information or capability provided by the area
1	EWS tabs and menus	For more information, see “Navigating through the HP Embedded
		Web Server” on page 3.
2	Enable AutoSend	Select this check box to enable the AutoSend feature.
3	Send every [interval]	Select the interval at which you want the product to send the
		product configuration and supplies usage information to HP.
4	Hewlett-Packard Online	View more information about how HP treats the information that
	Privacy Statement	is sent by AutoSend.

To enable the AutoSend feature

1Enable the outgoing and incoming e-mail by following the instructions that are listed in this chapter. (For more information, see “Email Server” on page 20.)

2Select the Enable AutoSend check box.

3Click an option to specify the interval at which you want the product to send the product configuration and supplies usage information to HP, and then type the number of days, weeks, months, or pages printed.

4Click Apply.

ENWW AutoSend 29