Soleus Air PH-3-12R-03 operating instructions Air Conditioner Mode, Dehumidifier Mode, Fan Mode

Page 11
OPERATING THE UNIT USING THE CONTROL PANEL

OPERATING THE UNIT USING THE CONTROL PANEL

Air Conditioner Mode

1)Install the exhaust hose and window kit properly (see pages 7 & 8).

2)Plug the Power Cord into an electrical outlet.

3)Turn on the unit by pressing the POWER button on the control panel.

4)Press the Mode button until the “ ” icon appears on the Multi-color display

5)Press the or buttons until the desired room temperature appears on the control panel display. The temperature ranges from 61°F - 88 °F (16 °C - 31 °C).

6)Select the desired fan speed by pressing the FAN SPEED button.

NOTE: During hot days, the unit will cool the room most efficiently by setting the temperature at the lowest setting and the fan speed on high. Reducing the length of the exhaust duct, insulating the exhaust hose and window kit, and keeping direct sunlight to a minimum will also improve the cooling efficiency.

NOTE: When the unit is running on cooling mode, the exhaust hose is required and must be vented outside using the supplied window kit.

Dehumidifier Mode

1)Install the exhaust hose and window kit properly (see pages 7 & 8).

2)Plug the Power Cord into an electrical outlet.

3)Turn on the unit by pressing the POWER Button on the control panel.

4)Press the MODE button until the “ Air Conditioner Mode ” appears on the control panel display.

NOTE: The unit operates at low fan speed during dehumidifier mode. The unit cools room slightly during the dehumidification. Keep the windows and doors closed to aid the effectiveness of the unit in removing the moisture from the room.

NOTE: When the unit is running in dehumidifier mode, the exhaust hose is required and must be vented out- side using the supplied window kit. The unit will not perform in dehumidifier mode when the room tempera- ture is lower than 61°F .

Fan Mode

1)Plug the Power Cord into an electrical outlet.

2)Turn on the unit by pressing the POWER button on the control panel.

3)Press the MODE button until the “ Dehumidifier Mode ” icon appears on the control panel display.

4)Select the fan speed by pressing the FAN SPEED button.

5)To circulate more air, press the SWING button on the remote control. The louvers will oscillate back and forth spreading more air throughout the room.

11

Image 11
Contents With Heat Pump Technology Operating Instructions Model No. PH3-12R-03 Reference No. KY2-34Portable Air Conditioner and Heater IMPORTANT INSTRUCTIONS PH3-12R-03 PACKAGE CONTENTSSPECIFICATIONS Model NumberRESET TEST LCDI POWER CORD AND PLUGBACK ACCESSORIESFRONT MOUNTING THE EXHAUST HOSE INSTALLATIONSELECTING THE LOCATION WINDOW KIT INSTALLATION WINDOW KIT INSTALLATIONWINDOW KIT INSTALLATION cont’d MULTI-COLORDISPLAY CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONSCONTROL PANEL & MULTI-COLORDISPLAY CONTROL PANEL BUTTONS Refer to the images on page OPERATING INSTRUCTIONSOPERATING THE UNIT USING THE CONTROL PANEL Air Conditioner ModeDehumidifier Mode Fan ModeAuto Mode Heat ModeDRAIN HOLE DRAIN PLUG Compressor IndicatorEmergency Condensate Holding Tank REMOTE CONTROL OPERATING INSTRUCTIONS OPERATING THE UNIT USING THE REMOTE CONTROLMAINTENANCE For Technical Support and Warranty Service WARRANTYOne Year Limited Warranty THIS WARRANTY DOES NOT COVER