WINDOW KIT INSTALLATION
WINDOW KIT INSTALLATION
The window kit is designed to fit into most standard vertical and horizontal windows, as well as some sliding glass doors. However, it may be necessary to modify some aspects of the installation process for certain window types.
Open the window or sliding door and adjust the length of the window kit to fit the opening. If the window kit is not long enough, connect the extra window kit panel to fit the opening. Mark and cut down a single panel of the window kit if neces- sary.
Place the window kit between the window and the window frame as shown in the images to the right. Close the window onto the window kit to form a tight seal.
Attach the exhaust duct adapter to the window kit. Tabs located on the adapter will lock into place securing the adapter to the window kit.
Window Slider Kit
Minimum: 28.5”
Maximum: 55”
Window Slider Kit
Minimum: 28.5”
Maximum: 55”
7