Regulatory Information, Connections to Peripheral Devices

Specifications and Regulatory Information

Regulatory Information

This section presents information that shows how the F1059B floppy disk drive, F1059C floppy disk drive, F1164A 810–MB hard disk drive, and F1166A 1.44–GB hard disk drive complies with regulations in certain regions. Any modifications to the OmniBook not expressly approved by Hewlett-Packard could void the authority to operate the OmniBook in these regions.

U.S.A.

The HP F1059B/C generates and uses radio frequency energy and may interfere with radio and television reception. The floppy drive complies with the limits for a Class B computing device as specified in Part 15 of FCC Rules, which provide reasonable protection against such interference in a residential installation. The “FCC ID” number for this product is listed on the bottom of the OmniBook. In the unlikely event that there is interference to radio or television reception (which can be determined by removing the OmniBook’s batteries and ac adapter), try the following:

∙Reorienting or relocating the receiving antenna.

∙Relocating the floppy drive with respect to the receiver.

∙Connecting the OmniBook ac adapter to another power outlet.

Connections to Peripheral Devices

To maintain compliance with FCC Rules and Regulations, use shielded cables supplied with this device.

For more information, consult your dealer, an experienced radio/television technician, or the following booklet, prepared by the Federal Communications Commission: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock Number 004-000-00345-4. At the first printing of this manual, the telephone number was (202) 512-1800.

1-32