Soleus Air GM-WAC-18ESE-C, GM-WAC-15ESE-C manual

Page 8

INSTALLATION & ASSEMBLY INSTRUCTIONS - WINDOW MOUNTING REMOVE CHASSIS

1.

Pull down the front panel and remove the filter (FIG. 1 below)

 

2.

Lift the front panel upwards to remove and place to the side.

 

 

FIG. 1

 

 

 

 

FIG. 1

 

 

 

 

FIG. 2

 

 

 

 

 

3.Locate the four faceplate screws and remove. These screws will need to be re-installed prior to mounting the air con- ditioner (FIG. 2 above)

4.After removing the screws, gently pull away the faceplate from the air conditioner cabinet (FIG. 3 & 4).

FIG. 3

 

 

 

FIG. 4

 

 

 

5. Remove the two control panel screws from the front panel (FIG 5).

FIG. 5

7

Image 8
Contents GM-WAC-15ESE-C GM-WAC-18ESE-C Page Important Safety Instructions Recommended Ground Method Lcdi Power Cord and PlugElectrical Requirements Parts List Tools NeededModel SpecificationsDisclaimer Installation & Assembly Instructions Prior to Installing the Air ConditionerWindow Preparation Storm Window RequirementsPage Installation & Assembly Instructions Window Mounting Remove ChassisInstallation & Assembly Instructions Window Mounting Assembly & Installation Top Angle Rail and Side Bracket InstallationTOP View Placing the Cabinet Inside the WindowInstall Support Brackets Install the Window Lock and Sash SealExtend the Accordion Panels MarkTHRU-THE-WALL Installation Installing the Chassis into the CabinetSelect the Wall Location Prepare the WallAssembly & Installation THRU-THE-WALL Prepare and Install the CabinetMasonry Construction Support Bracket Wooden StripAir Conditioner Controls Normal Operating Sounds Using Your AIR ConditionerElectronic Control Panel & Remote Control Remote Control Operating Your AIR ConditionerOperating Your AIR Conditioner Using Your AIR Conditioner Care and Cleaning Air Filter CleaningCabinet Cleaning Winter StorageTroubleshooting Problem Possible Causes SolutionsWater collects in the base pan Water is dripping outsideWater is dripping inside the room Warranty 66129908033