HP CP3505 manual 1Device Status

Device Status

Use the Device Status screen to view the current status of the product. The following illustration and table describe how to use this screen.

Information

Figure 2-1Device Status screen

Table 2-1Device Status

Callout	Area on the screen	Information or capability that the area provides
1	HP EWS tabs and	For more information, see Navigating through the HP Embedded Web Server.
	menus
2	Status	Shows the device status (the same information that appears on the control-panel
		display).
3	Control-panel buttons	Use these control-panel buttons just as you would at the product. To select which
		control-panel buttons appear on this screen, go to the General Security screen on
		the Settings tab.
4	Supplies	Shows the percentage of life remaining for each supply.
5	Supplies Details	Opens the Supplies Status screen, where you can view information about product
		supplies.
6	Media	Shows the status and configuration information for the input trays and output bins.
		The media status is OK until the tray is completely empty. When the tray is empty,
		the status is Empty.
7	Change Settings	Opens the Other Settings screen, where you can change the paper-type settings.

8 Chapter 2 Viewing product status from the HP EWS Information screens ENWW