printer cannot be discovered
Ensure the following, and then try to discover the printer again:
•The printer is plugged in.
•The Bluetooth LED is not on persistently.
If the printer cannot be discovered, try moving the sending device closer to the printer.
If the Bluetooth LED is flashing, is on, or is off, see Bluetooth card LED is flashing, is on, or is off on page 36.
printer is discovered but will not print
Ensure the following:
•Paper is in the printer.
•The print cartridges are not empty.
•There is no paper jam in the printer.
See the onscreen User’s Guide on the HP Deskjet 450 Starter CD for more printer troubleshooting information.
If the printer will not print but no error appears, then ensure the following:
•The Bluetooth LED is not on persistently.
•The Bluetooth LED is not flashing.
If the Bluetooth LED is flashing, is on, or is off, see Bluetooth card LED is flashing, is on, or is off on page 36.
If the Bluetooth LED is on persistently, then follow these steps:
1.Press the Power button to turn off the printer.
2.Disconnect the power cord from the printer.
3.Reconnect the power cord to the printer.
4.Press the Power button to turn on the printer.
5.Try to print the document again.
If the printer will not print, then press and hold the Power button while tapping the Cancel (X) button 4 times to print a Configuration page. If the Bluetooth connectivity status indicates “not installed”, then contact HP Customer Care. See Customer Support in the HP Deskjet 450 Reference Guide, or see the onscreen User’s Guide on the Starter CD.
37