hp jornada 500 series
installing an Anycom
1.Place the Jornada in its cradle.
2.Insert the card’s software CD into the computer’s
3.Follow the onscreen instructions to install the software.
4.After the software has been installed, remove the Jornada from its cradle.
5.Press the Reset button with the stylus. The Reset button is located on the back of the Jornada.
6.Wait for the Jornada to reboot, and then press the Reset button again.
Caution! Failure to reset the hp jornada 500 series twice after installing an Anycom
After reset, the following message appears:
7.Insert the Bluetooth card into the expansion slot of the Jornada.
hp jornada 500 series expansion slot
10