HP 2500C manual

Page 11

1

2

3

 

3

 

 

3

3

A3

4

 

5

 

6

 

3

A3

Loading Commonly-Used Media in Tray 3

1.Grasp the sides of Tray 3 and pull it out of the printer.

2.If you wish to change the paper size that has been set in the tray, go to step

3.If you wish to load paper into tray using the existing setting, go to step 5.

3.Snap the Paper Length and Width Guides into the slots. Paper size markings are indicated beside their respective slots.

4.If you are loading paper sizes such as B4, A3, 11"x17", 13"x19" and 330x483mm, unlock the tray lock, extend the tray and re-lock the tray lock.

If you are loading paper sizes such as Letter, A4 and Legal, check that the tray is not extended. If it is, unlock the tray lock, push in the tray and re-lock the tray lock.

5.Load paper by aligning the paper edge to the Paper Length guide first.

6.Tap the left side of the stack of paper to ensure that it is flushed to the right side of the tray.

8

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Quick Reference Guide Acknowledgments Contents Press Select to save or activate your selection To Check the Printers ConfigurationNavigating the Menu System Press Item until the desired item appearsCommon Printer Messages To Print a DiagnosticTo Print a Menu Map Press Select to print the menu mapRight Back Cover OpenTOP Cover OUTContinue Type SizePress Press toNear Expiry CartRemove Tray 1 and set it aside Loading Commonly-Used Media in TrayPress Item to select Tray 2 TYPE= Tray lock, extend the tray and re-lock the tray lockPage Press the button to print Re-insert Tray 3 into the printerPress Item to select Tray 3 TYPE= Loading Paper in TrayLoading Paper in the Rear Manual Feed Align Printheads Clean PrintheadsWhen you have finished entering the values press Select Rotate to remove the paper Lift the Top Cover and pull out any paper that may be stuckTray 1 and Rear Media Feed For More Information Copyright 1998 Hewlett-Packard Company
Related manuals
Manual 66 pages 21.09 Kb
Top Page Image Contents