HP 2500C Tray lock, extend the tray and re-lock the tray lock, Press Item to select Tray 2 TYPE=

Page 10

4.If you are loading paper sizes such as B4, A3, 11"x17", 13"x19" and 330x483mm, unlock

the tray lock, extend the tray and re-lock the tray lock.

If you are loading paper sizes such as Letter, A4 and Legal, check that the tray is not extended. If it is, unlock the tray lock, push in the tray and re-lock the tray lock.

5. Insert paper, print side down into the printer. 6. Tap the left side of the stack of paper to

ensure that it is flushed to the right side of the tray.

7. Replace Tray 1.

8. If Tray 2 is extended, place the Extended Tray Cover over the tray.

9. On the control panel, press [Menu] until PAPER HANDLING MENU appears.

10.Press [Item] to select TRAY 2 TYPE=

11. Press [Value] to select the media type you have loaded into the tray and press [Select].

For more information, please refer to the User's Guide.

Image 10

Contents Quick Reference Guide Acknowledgments Contents Press Item until the desired item appears To Check the Printers ConfigurationNavigating the Menu System Press Select to save or activate your selectionPress Select to print the menu map To Print a DiagnosticTo Print a Menu Map Common Printer MessagesOUT Cover OpenTOP Cover Right BackPress to Type SizePress ContinueCart Near ExpiryLoading Commonly-Used Media in Tray Remove Tray 1 and set it asideTray lock, extend the tray and re-lock the tray lock Press Item to select Tray 2 TYPE=Page Loading Paper in Tray Re-insert Tray 3 into the printerPress Item to select Tray 3 TYPE= Press the button to printLoading Paper in the Rear Manual Feed Clean Printheads Align PrintheadsWhen you have finished entering the values press Select Lift the Top Cover and pull out any paper that may be stuck Rotate to remove the paperTray 1 and Rear Media Feed For More Information Copyright 1998 Hewlett-Packard Company

Related manuals

Manual 66 pages 21.09 Kb