Rear Manual Feed - The Rear Manual Feed is designed to provide a straight paper path for printing on thicker media (up to 0.3mm) such as cardstock or labels without bending. This paper path allows you to print only 1 sheet at a time.
Loading Commonly-Used Media in Tray 2
Note:
•Tray 2 is a fixed tray. Tray 1 has to be removed before Tray 2 can be accessed.
•Tray 2 is designed to hold up to 150 sheets of paper and can accommodate paper sizes such as Letter, A4, Legal, B4, A3, 11"x17", 13"x19" and 330x483mm.
1.Remove Tray 1 and set it aside.
2.If you wish to change the paper size setting that has been set in the tray, go to step 3. If you wish to load paper using the existing tray setting, go to step 5.
3.Snap the Paper Length and Width Guides into the slots. Paper size markings are indicated beside their respective slots.
2 |