HP rp5000 Point of Sale manual Assembling the Stand, Removing the USB Interface Cable

Page 12

Setting Up the Scanner

2.Gently tug the cable to ensure the connector is properly secured.

3.Connect the other end of the interface cable into a USB port on the POS computer.

Removing the USB Interface Cable

1.Unplug the installed cable’s modular connector by depressing the connector clip with the tip of a screwdriver.

2. Carefully slide out the cable.

Assembling the Stand

The stand allows hands-free scanning when attached to the scanner.

1.Unscrew the wingnut from the bottom of the neckpiece scanner cup.

2.Fit the bottom of the neck piece 1 into the opening on the top of the stand base 2.

3.Tighten the wingnut 3 underneath the base to secure the cup and neck piece to the base.

✎Before tightening the wingnut under the base, ensure that the flat areas on the flexible neck fit securely in the grooves in the base.

3–2

www.hp.com

User Guide

Image 12

Contents User Guide User Guide Contents Operating the Scanner Product Features Identifying Barcode Scanner Components Safety and Maintenance Guidelines Important Safety InformationAvoid extreme wrist angles Avoid Bending Maintenance Guidelines Safety and Maintenance Guidelines Setting Up the Scanner Connecting the USB Interface CableAssembling the Stand Removing the USB Interface CableMounting the Stand Screw MountSetting Up the USB Interface Tape MountUSB Default Parameters USB Host Default ParametersParameters Descriptions USB Country Keyboard Types Country CodesSetting Up the Scanner Setting Up the Scanner Setting Up the Scanner USB Keystroke Delay USB Caps Lock Override USB Ignore Unknown Characters Emulate Keypad USB Keyboard FN 1 SubstitutionFunction Key Mapping Simulated Caps LockConvert Case USB Ascii Character Set Prefix/Suffix Full Ascii Code Keystroke Value Encode CharCtrl P Prefix/Suffix Full Ascii Code Keystroke Value Encode Char Prefix/Suffix Full Ascii Code Keystroke Value Encode Char Prefix/Suffix Full Ascii Code Keystroke Value Encode Char Prefix/Suffix Full Ascii Code Keystroke Value Encode Char ALT Keys Keystroke ALT G Other Value Keystroke F1 Keys Keystroke Setting Up the Scanner Keypad Keystroke Extended Keystroke Keypad Operating the Scanner Defining Beeper SequencesStandard Beeper Definitions Beeper Sequence Indication Parameter Menu ScanningDefining LED Indicators Standard Beeper DefinitionsBeeper Sequence Indication Scanning in Hand-Held Mode Standard LED DefinitionsAiming the Scanner Scanning in Hands-Free Mode Programming User Preferences Scanning Sequence ExamplesErrors While Scanning User Preferences Default ParametersUser Preferences Default Parameter Set Default Parameter User PreferencesBeeper Tone Beeper Volume Power Mode Laser On Time Beep After Good Decode Troubleshooting Solving Common ProblemsProblem Possible Cause Solution Using the Worldwide Web Preparing to Call Technical Support Troubleshooting Troubleshooting Technical Specifications HP USB Barcode ScannerESD Decode Zone Technical Specifications

Related manuals

Manual 63 pages 3.59 Kb