HP rx1620 manual Locking the Processor Assembly in Place

8.Use the special processor tool (P/N 5069-5441) shipped with your replacement processor assembly to lock the processor in place on the system board. To do this, insert the special processor tool into the lock and rotate it clockwise 180 degrees.

Figure 8 Locking the Processor Assembly in Place

IMPORTANT: Before proceeding to step 9, make sure the processor is locked in place on the system board, or the processor will be damaged when the captive screws are tightened.

9.Screw in the four captive screws. Figure 9 Installing the Processor

10.Slide the power module on the system board metal mounting bracket forward to mate the power module connector with the processor connector.

14 Installing and Configuring