HP Debranded 22 Inch TSMT506, IQ504 KQ436AA-NOOS manual Setting up a wireless home network

Setting up a wireless home network

First-time wireless network installation requires that you:

1Purchase high-speed Internet service from an Internet service provider (ISP).

2Purchase a broadband modem (DSL or cable). This may be provided by the ISP.

3Purchase and install a wireless router (sold separately), if one is required.

NOTE: Broadband modem and router installation procedures vary, depending on the manufacturer. Follow the manufacturer’s instructions.

4Connect your computer to the network.

NOTE: A DSL wall connection is shown here. If you have a cable modem, the connection from the wall to the modem will be with a coaxial cable.

		Broadband
		modem
Internet	Wall plug	(DSL/cable)	Wireless router

5Configure the HP TouchSmart PC to connect to the wireless network. a Turn on your HP TouchSmart PC.

b Connect your HP TouchSmart PC to the wireless network:

￿Right-click the Network icon on the taskbar, and then select Connect to a network. When the window opens, select the network, and then click Connect.

Or

￿Right-click the Network icon on the taskbar, and then select Network and Sharing Center. When the window opens, select Setup a wireless router or access point, and then follow the onscreen instructions.

cTest the wireless network by opening your Web browser and accessing any Web site.

6Add wireless devices to the network (optional).

14Getting Started