HP D8C61UT#ABA, C6Y70UT#ABA, C6Z94UT, Pro 6300 B5N09UT#ABA, Pro 6300 C9H79UT#ABA manual

Page 44

7.Slide the drive into the drive bay, making sure to align the guide screws with the guide slots, until the drive snaps into place. The bottom bay is for the primary hard drive. The upper bay is for an optional secondary hard drive.

Figure 2-30Sliding a Hard Drive into the Drive Bay

8.Connect the power cable (1) and data cable (2) to the back of the hard drive.

NOTE: The power cable for the hard drives is a two-headed cable that is routed from the system board to the rear of the hard drive bays.

Figure 2-31Connecting the Hard Drive Cables

9.If installing a new drive, connect the opposite end of the data cable to the appropriate system board connector.

NOTE: If your system has only one SATA hard drive, you must connect the hard drive data cable to the dark blue connector labeled SATA0 to avoid any hard drive performance problems. If you are adding a second hard drive, connect the data cable to the white connector labeled SATA1.

10.Route the power and data cables in their cable retainers.

11.Replace the computer access panel.

36 Chapter 2 Microtower (MT) Hardware Upgrades

Image 44

Contents HP Compaq Business PC Hardware Reference Guide HP Compaq Business PC Hardware Reference Guide About This Book Iv About This Book Table of contents Front Bezel Security Preventing Electrostatic Damage Grounding Methods Viii Product Features Standard Configuration FeaturesMicrotower MT Front Panel Components 1Front Panel ComponentsSmall Form Factor SFF Front Panel Components 2Front Panel ComponentsMicrotower MT Rear Panel Components 3Rear Panel ComponentsSmall Form Factor SFF Rear Panel Components 4Rear Panel ComponentsMedia Card Reader Components 5Media Card Reader ComponentsKeyboard 6Keyboard ComponentsUsing the Windows Logo Key 7Windows Logo Key FunctionsSerial Number Location Page Microtower MT Hardware Upgrades Serviceability FeaturesRemoving the Computer Access Panel Replacing the Computer Access Panel Removing the Front Bezel Removing Bezel BlanksReplacing the Front Bezel 5Removing a Bezel BlankSystem Board Connections 1System Board ConnectionsInstalling Additional Memory DIMMsDDR3-SDRAM DIMMs Populating Dimm SocketsInstalling DIMMs Page Removing or Installing an Expansion Card Page Page Page Drive Positions 2Drive PositionsInstalling and Removing Drives MediaGuide Screw Device Removing a 5.25-inch or 3.5-inch Drive from a Drive Bay 19Removing the Drives Microtower MT Hardware Upgrades Installing a 5.25-inch or 3.5-inch Drive into a Drive Bay Page Page Removing a Hard Drive from a Drive Bay Installing a Hard Drive into an Internal Drive Bay Page Page Page Padlock Installing a Security LockCable Lock HP Business PC Security Lock Page Page Page Front Bezel Security Page Small Form Factor SFF Hardware Upgrades Removing the Computer Access Panel Replacing the Computer Access Panel Removing the Front Bezel 4Removing a Bezel Blank Changing from Desktop to Tower Configuration Black Unused Power X4PCIEXP Installing DIMMs 8Rotating the Drive Cage Up Installing Additional Memory Page Removing or Installing an Expansion Card Page Page Page 16Drive Positions 17Extra Guide Screw Locations Page Removing a 5.25-inch Drive from a Drive Bay Page Installing a 5.25-inch Drive into a Drive Bay 21Removing the 5.25-inch DrivePage Page Removing a 3.5-inch Drive from a Drive Bay Page Installing a 3.5-inch Drive into a Drive Bay Page Page Page Page Page 40Installing a Cable Lock HP Business PC Security Lock Page Page Page Front Bezel Security Page Battery Replacement Type Page Removing and Replacing a Removable 3.5-inch Sata Hard Drive Page Figure B-5Replacing the Hard Drive Page Page Unlocking the Smart Cover Lock Smart Cover FailSafe KeyPage Preventing Electrostatic Damage Grounding MethodsComputer Operating Guidelines and Routine Care Optical Drive Precautions CleaningSafety Shipping PreparationIndex Tower conversion