HP Pro 6300 B5N09UT#ABA, D8C61UT#ABA, C6Y70UT#ABA, C6Z94UT, Pro 6300 C9H79UT#ABA manual

Page 82

12.Align the guide screws with the slots on the chassis drive cage, press the hard drive down into the bay, then slide it back until it stops and locks in place.

Figure 3-38Installing the Hard Drive

13.Connect the power cable (1) and data cable (2) to the back of the hard drive.

NOTE: If the system has only one SATA hard drive, the data cable must be connected to the dark blue connector labeled SATA0 on the system board to avoid any hard drive performance problems.

Figure 3-39Connecting the Hard Drive Cables

14.Rotate the drive cage for internal drives and the power supply down to their normal positions.

15.Replace the access panel.

16.If the computer was on a stand, replace the stand.

17.Reconnect the power cord and turn on the computer.

18.Lock any security devices that were disengaged when the access panel was removed.

74 Chapter 3 Small Form Factor (SFF) Hardware Upgrades

Image 82

Contents HP Compaq Business PC Hardware Reference Guide HP Compaq Business PC Hardware Reference Guide About This Book Iv About This Book Table of contents Front Bezel Security Preventing Electrostatic Damage Grounding Methods Viii Product Features Standard Configuration FeaturesMicrotower MT Front Panel Components 1Front Panel ComponentsSmall Form Factor SFF Front Panel Components 2Front Panel ComponentsMicrotower MT Rear Panel Components 3Rear Panel ComponentsSmall Form Factor SFF Rear Panel Components 4Rear Panel ComponentsMedia Card Reader Components 5Media Card Reader ComponentsKeyboard 6Keyboard ComponentsUsing the Windows Logo Key 7Windows Logo Key FunctionsSerial Number Location Page Microtower MT Hardware Upgrades Serviceability FeaturesRemoving the Computer Access Panel Replacing the Computer Access Panel Removing the Front Bezel Removing Bezel BlanksReplacing the Front Bezel 5Removing a Bezel BlankSystem Board Connections 1System Board ConnectionsDDR3-SDRAM DIMMs Installing Additional MemoryDIMMs Populating Dimm SocketsInstalling DIMMs Page Removing or Installing an Expansion Card Page Page Page Drive Positions 2Drive PositionsInstalling and Removing Drives MediaGuide Screw Device Removing a 5.25-inch or 3.5-inch Drive from a Drive Bay 19Removing the Drives Microtower MT Hardware Upgrades Installing a 5.25-inch or 3.5-inch Drive into a Drive Bay Page Page Removing a Hard Drive from a Drive Bay Installing a Hard Drive into an Internal Drive Bay Page Page Page Cable Lock Installing a Security LockPadlock HP Business PC Security Lock Page Page Page Front Bezel Security Page Small Form Factor SFF Hardware Upgrades Removing the Computer Access Panel Replacing the Computer Access Panel Removing the Front Bezel 4Removing a Bezel Blank Changing from Desktop to Tower Configuration Black Unused Power X4PCIEXP Installing DIMMs 8Rotating the Drive Cage Up Installing Additional Memory Page Removing or Installing an Expansion Card Page Page Page 16Drive Positions 17Extra Guide Screw Locations Page Removing a 5.25-inch Drive from a Drive Bay Page Installing a 5.25-inch Drive into a Drive Bay 21Removing the 5.25-inch DrivePage Page Removing a 3.5-inch Drive from a Drive Bay Page Installing a 3.5-inch Drive into a Drive Bay Page Page Page Page Page 40Installing a Cable Lock HP Business PC Security Lock Page Page Page Front Bezel Security Page Battery Replacement Type Page Removing and Replacing a Removable 3.5-inch Sata Hard Drive Page Figure B-5Replacing the Hard Drive Page Page Unlocking the Smart Cover Lock Smart Cover FailSafe KeyPage Preventing Electrostatic Damage Grounding MethodsComputer Operating Guidelines and Routine Care Safety Optical Drive PrecautionsCleaning Shipping PreparationIndex Tower conversion