HP 8100 manual Technical Specifications Audio, High Definition Audio

QuickSpecs

HP Compaq 8100 Elite Series

Technical Specifications - Audio

High Definition Audio

Type

HD Stereo Codec

Audio I/O Ports

Integrated

Realtek 4-channel ALC261 codec

Front microphone-In (150-K ohm Input Impedance

Rear Line-In/Microphone input (150-K ohm Input Impedance, function is configurable by audio driver)

Rear Line-Out* (190 ohms Output Impedance, expects at least a 10-K ohm load)

Front Headphone-Out (0.5 Ohm Output Impedance, expects at least a 32 ohm load) Front Microphone/Headphone jack is re-task able to provide Microphone input, line-in or Headphone output to support connecting two headphones to the front of the system. When configured as a second front headphone output, both front headphone outputs are always driven with the same signal.

Internal Speaker Amplifier

Multistreaming Capable

Sampling

Wavetable Syntheses (software)

Analog Audio

#of Channels on Line-Out (mono/stereo)

Internal Audio Speaker Power

Rating

Internal Speaker

External Speaker Jack

(Line-Out)

For the internal speaker only. External speakers must be powered externally. Rear Line-in audio port is re-taskable as either Line-in or Microphone-In.

Multi-streaming can be enabled in the Realtek control panel to allow independent audio streams to be sent to/from the front and rear jacks.

8 kHz – 192 kHz

Yes – Uses OS soft wavetable Yes

Stereo (Left & Right channels)

1.5W

Yes Yes

Note:

The audio ports/jacks provided by all of our systems are 3.5mm in diameter. This would include both the front jacks and rear jacks, for audio in/out, mic in and headphone out.

DA - 13524 Worldwide — Version 24 — April 22, 2011 Page 23