HP D5463 manual Load paper

Page 7

TIP: Tap a stack of paper on a flat surface to align the edges. Make sure all the paper in the stack is the same size and type and free of rips, dust, wrinkles, and curled or bent edges.

3.Insert the stack of paper into the main input tray with the short edge forward and the print side down. Slide the stack of paper forward until it stops.

CAUTION: Make sure that the product is idle and silent when you load paper into the main input tray. If the product is servicing the ink cartridges or otherwise engaged in a task, the paper stop inside the product might not be in place. You could push the paper too far forward, causing the product to eject blank pages.

TIP: If you are using letterhead, insert the top of the page first with the print side down.

4.Slide the paper-width guide inward until it stops at the edge of the paper.

Do not overload the main input tray; make sure the stack of paper fits within the main input tray and is no higher than the top of the paper-width guide.

5.Lower the output tray. Pull the tray extender towards you, as far as it will go. Flip the paper catch at the end of the tray extender to open the extender the rest of the way.

Overview

Load paper

5

Image 7

Contents Basics Guide Hewlett-Packard Company notices Contents HP Photosmart at a glance HP Photosmart overviewLabel Icon Name and Description Control panel featuresLoad paper Find more informationLoad paper Overview Print directly onto a CD/DVD Avoid paper jamsOverview Print a photo on photo paper To print your photos Replace the ink cartridgesReplace the ink cartridges Overview Troubleshooting common setup issues Uninstall and reinstall the softwareTo uninstall and reinstall the software Hardware setup troubleshooting Solution 5 Load paper in the input tray After setting up the product, it does not printSolution 1 Press the On button to turn on the product Solution 2 Set your product as the default printerTo clear a paper jam from the rear door CD/DVD print troubleshootingSolution 1 Push the CD/DVD holder into the CD/DVD tray Product does not detect the CD/DVD holderProduct does not detect a CD/DVD on the holder Solution 2 Remove the CD/DVD holder from the storage areaSolution 3 Place the CD/DVD on the CD/DVD holder Solution 4 Load the next disc on the CD/DVD holderProduct is printing on a non-printable area of my disc Solution 1 Change the software settingsSolution 2 Load a new CD/DVD with the printable side up Product stalled while printing a CD/DVDInk on the CD/DVD is not drying Solution 1 Use inkjet printable discsProduct reports a CD/DVD size mismatch error Information on ink cartridges and the print headSupport process If you have a problem, follow these stepsRegulatory model identification number Product specificationsSystem requirements Regulatory noticesTechnical information Warranty$UJHQWLQD