Roof Installation

Chapter 3: Installation

3-1 Tower Installation Location

Select a location over or nearest to the heaviest building structural members. These members should be outside load-bearing walls, building columns, or roof joists. You may need to spread the load over several structural members to provide support without over-stressing any one member. See Figure 1 on page 11 for structural steel support requirements. You are responsible for contacting a structural engineer to verify support requirements.

Choose a site with easy access to simplify routine maintenance. This consideration is especially important when a tower is located near a roof edge.

Avoid locations where wind currents can re-circulate tower discharge air.

Stay clear of roof discharge points. Avoid stacks, exhaust fans, dust collector discharges, or any process that can contaminate air circulating through the tower.

Caution! Multiple tower installations require at least five feet (60”/ 152cm) clearance between towers to reduce freeze-ups. The manufacturer is not responsible for damages resulting from improper site selection.

Ground Installation

Elevate the tower so that positive pressure is on pump suction and to allow maintenance access to the underside of the tower cell.

Alternative Installations

Outside Installation with the Pump Tank Reservoir Inside. Water exits the tower and drains to a pump tank reservoir inside the building below. The tower outlet must be at least three feet (approximately 1 meter) above the top of the pump tank. The outside tower basin must drain completely when shut down to avoid winter freeze up.

Outside Installation Using the Tower Basin as a Reservoir. Process pump suction piping is directly connected to the bottom outlet on the tower. Install the optional outlet basket filter and automatic float assembly. Contact the Sales department for this accessory kit.

Note: A dimension of 60”is required between the tower air inlet and the wall of a building. See above caution for required distance between towers.

Fiberglass Cooling Towers

Chapter 3: Installation

Page 10 of 25

882.00440.00 SC6-610.6 specifications

The Sterling 882.00440.00 SC6-610.6 is a reliable and versatile tool that has been designed to meet the needs of both professional tradespeople and DIY enthusiasts. Known for its durability and efficiency, this equipment integrates advanced technologies to enhance performance across various applications.

At the core of the Sterling 882.00440.00 SC6-610.6 is its robust construction, engineered to withstand the rigors of demanding work environments. The body is made from high-quality materials that resist wear and tear, ensuring longevity and consistent performance over time. This feature makes it an ideal choice for heavy-duty tasks while also being lightweight enough to facilitate ease of handling.

One of the standout characteristics of this tool is its ergonomic design. The handle is crafted with user comfort in mind, featuring a non-slip grip that allows for extended use without causing fatigue. This is particularly beneficial for professionals who may be using the equipment for long hours. Additionally, the balanced weight distribution enhances control and precision, allowing for more accurate operation.

The Sterling 882.00440.00 SC6-610.6 is equipped with cutting-edge technology that promotes efficiency. The tool includes an adjustable speed mechanism, enabling users to tailor the performance according to the task at hand. This feature is crucial when working with different materials, as it allows for optimal results whether drilling, cutting, or fastening.

Moreover, safety is a paramount concern with the Sterling 882.00440.00 SC6-610.6. It incorporates several safety mechanisms, such as automatic shut-off features and protective shields, which minimize the risk of accidents during operation. This is particularly important in professional settings where safety regulations must be adhered to.

Another remarkable aspect of this tool is its compatibility with a wide range of accessories and attachments, making it highly adaptable to various tasks. This versatility enhances its functionality, allowing users to streamline their workflow and tackle different projects without the need for multiple devices.

In summary, the Sterling 882.00440.00 SC6-610.6 stands out in the market due to its durable construction, ergonomic design, advanced technology, and safety features. Whether you are a seasoned professional or an aspiring DIYer, this tool promises to deliver exceptional performance and reliability, making it an essential addition to any toolkit.