Sterling 882.00440.00 SC6-610.6 Rigging, Installing the Fan Package, Installing Piping

Page 13

3-3 Rigging

Handle the fiberglass cooling tower shell section very carefully. Until installed and properly supported, it is subject to handling damage. See Figure 2 for rigging information.

Caution! Use an appropriately rated hoist to support the equipment.

Figure 2: Rigging Arrangement

Channel

I-beam

Spreader bar wide enough to protect cooling tower shell

 

Rope stay

 

 

Caution! Use appropriately rated

The rope stay goes

hoist to support equipment.

all the way around the

 

tower to keep the

 

vertical rope in position.

 

Do not let the rigging transfer any load to the cooling tower shell. Provide support to the bottom of the cooling tower when rigging. Do not rig from the corners of the optional base. Do not rig less than 8 inches from the corners.

3-4 Installing the Fan Package

Install the fan package after the tower is in position.

1.Remove the dunnage securing the fan package to the pallet.

2.Carefully rig the package using the lifting eyebolts provided.

3.Mounting holes have been pre-drilled at the factory; move the package into position and fasten it securely with the stainless steel hardware provided.

3-5 Installing Piping

Make sure that all piping attached to the cooling tower is externally supported. Do not support anything from the cooling tower shell.

The cooling tower and related fittings and connections are constructed of plastic materials and are not designed to bear external weight.

Do not apply high torque to the fittings that are made up into the tower fittings. Use a backup wrench when applying torque to the fittings.

Fiberglass Cooling Towers

Chapter 3: Installation

Page 13 of 25

Image 13
Contents Fiberglass Cooling Towers Shipping Information Table of Contents Parts List Electrical Schematics Structural Steel Support Requirements List of FiguresHow to Use This Manual SafetySafety Symbols Used in this Manual Responsibility Functional Description Standard FeaturesModels Covered in This Manual General DescriptionOptional Features Tower Installation Location InstallationRoof Installation Ground InstallationStructural Steel Support Requirements Assembling the Cooling Tower in the Field Installing Piping Installing the Fan PackageRigging Tower water Flexible PVC Outlet Coupler Initial Start-up Setting Up the Water Balancing ValveBleed-Off and Evaporation Rates OperationWinter Operation Considerations Preventative Maintenance MaintenanceRoutine Maintenance Water TreatmentReplacing Nozzles and Fill Corrective MaintenanceTechnical Assistance AppendixTop View Drawings and SpecificationsTower Performancec Cooling Tower Nozzle Capacity SF2004 SF2005 d SF2007 SF2009 SF2011 SF2015 Description Qty Parts ListTypical Wiring Diagram Electrical Schematics

882.00440.00 SC6-610.6 specifications

The Sterling 882.00440.00 SC6-610.6 is a reliable and versatile tool that has been designed to meet the needs of both professional tradespeople and DIY enthusiasts. Known for its durability and efficiency, this equipment integrates advanced technologies to enhance performance across various applications.

At the core of the Sterling 882.00440.00 SC6-610.6 is its robust construction, engineered to withstand the rigors of demanding work environments. The body is made from high-quality materials that resist wear and tear, ensuring longevity and consistent performance over time. This feature makes it an ideal choice for heavy-duty tasks while also being lightweight enough to facilitate ease of handling.

One of the standout characteristics of this tool is its ergonomic design. The handle is crafted with user comfort in mind, featuring a non-slip grip that allows for extended use without causing fatigue. This is particularly beneficial for professionals who may be using the equipment for long hours. Additionally, the balanced weight distribution enhances control and precision, allowing for more accurate operation.

The Sterling 882.00440.00 SC6-610.6 is equipped with cutting-edge technology that promotes efficiency. The tool includes an adjustable speed mechanism, enabling users to tailor the performance according to the task at hand. This feature is crucial when working with different materials, as it allows for optimal results whether drilling, cutting, or fastening.

Moreover, safety is a paramount concern with the Sterling 882.00440.00 SC6-610.6. It incorporates several safety mechanisms, such as automatic shut-off features and protective shields, which minimize the risk of accidents during operation. This is particularly important in professional settings where safety regulations must be adhered to.

Another remarkable aspect of this tool is its compatibility with a wide range of accessories and attachments, making it highly adaptable to various tasks. This versatility enhances its functionality, allowing users to streamline their workflow and tackle different projects without the need for multiple devices.

In summary, the Sterling 882.00440.00 SC6-610.6 stands out in the market due to its durable construction, ergonomic design, advanced technology, and safety features. Whether you are a seasoned professional or an aspiring DIYer, this tool promises to deliver exceptional performance and reliability, making it an essential addition to any toolkit.