Install Elevating Legrests (or Optional Footrests)
M13 wrench
WARNING: The footplates' lowest point should be no closer to the ground than 2 1/2 inches, to permit proper clearance.
WARNING: Do not stand on the footplates; this could cause the wheelchair to tip.
1.Set legrest on wheelchair frame (so that legrest hinge plates engage hinge pin bolts).
swingaway release lever
2.Swing legrest inward.
3.Attach
4.Use an M13 wrench to tighten.
5.Ensure legrests are locked in place and swingaway release levers are locked in a rearward position, toward back of wheelchair.
nut | hinge |
plate |
install elevating legrest /
optional footrest
WARNING: Ensure that front rigging is locked in place before occupying or operating wheelchair.
16 |
