ARMS
M10 wrench, M4 hex key
All Traveler HTC arms are fixed.
Remove Arm
1.Use an M10 wrench and M4 hex key to remove bolt and nut that secure arm to front arm socket.
2.Hold arm by center of armpad. Lift straight up and off.
Install Arm
1.Hold arm by center of armpad. Lower arm straight down into sockets.
right arm
nut | bolt |
front arm socket
remove arm
2.Install bolt and nut that secure arm to front arm socket as shown above. Use an M10 wrench and M4 hex key to tighten. Ensure nut is tightened and locked in place.
WARNING: Ensure that arms are locked in place before occupying or operating wheelchair.
18 |
