E&J 3J01-INS-LAB-RevB13 manual Install Push Handle / Anti-Fold Bar, Install Anti-Tippers

Install Push Handle / Anti-Fold Bar

M10 wrench, M4 hex key

1.Slide the push handle / anti- fold bar over both back posts as shown at right.

push handle / anti-fold bar

back post

2.Install the nuts and bolts that secure the push handle / anti-fold bar on both sides as shown at right. Use an M10 wrench and M4 hex key to tighten.

Install Anti-Tippers

install push handle /

anti-fold bar

push handle / anti-fold bar

bolt

M13 wrench, M5 hex key

1.Slide the anti-tipper tube, wheels downward, into the frame bottom rail, as shown at lower right.

2.Install bolt through top frame rail hole, anti-tipper, and bottom hole as shown. Install nut on bolt. Use an M13 wrench and M5 hex key to tighten.

nut

secure push handle /

anti-fold bar

bottom rail

bolt nut

3.Repeat steps 1 and 2 for other anti-tipper.

anti-tipper

install anti-tipper

WARNING: Anti-tippers

must be installed in the downward position.

14 3J01-INS-LAB-RevB13 • Traveler HTC User Manual