Correcting minor faults
Water in the wash cabinet is not heated; the programme sequence lasts too long
This machine has a resettable heater limiter which will switch off the heaters if they
^Remove the cause of the fault.
^Take off the service panel (see "Electrical connection").
^Press the reset button on the heater limiter (yellow) located on the left- hand side of the plastic cover.
If this switch trips again contact the Miele Service Department.
Customer service
Should you still have any difficulties or if a fault code "F..." appears in the display again, please contact your authorised Service Dealer or the Miele Service Department. See back cover for addresses. Please quote the fault code as well as the model type and number of your machine.
45