Operation
Switching on
^Close the door.
^Open the stopcocks (if turned off) .
^Press the
When the programme selector is at the STOP position f a point lights up in the display.
Starting a programme
^Turn the programme selector clockwise or
The temperature of the programme selected is shown in the display, except with
The indicator light next to the START button 6 flashes.
^Select additional function DRYING 3 if required (see "Selecting an additional function").
^Press the START button 6. The duration of the programme selected will appear in the display, counting upwards in minutes.
The indicator light next to the START button lights up.
Once the programme has started, all other programmes are blocked. If the programme selector is then turned to another programme, the values shown in the display go out. The values can be seen again if the programme selector is turned back to the position of the programme currently in operation.
^Press the 4 button to alternate between showing the current temperature and the amount of time elapsed in the display.
Note that during the
30