Cleaning and care
Cleaning the spray arms
Waste particles can lodge in the spray arm jets.
The spray arms should be inspected and cleaned regularly (approx. every 6 months).
^Use a sharp pointed object to push particles into the spray arm jets and rinse well under running water.
Remove the spray arms as follows:
^Unscrew the upper spray arm.
^Remove the middle spray arm (on the top basket) by unscrewing the toothed wheel mechanism.
Important:
The toothed wheel mechanism has a left hand thread, and to unscrew it, it must be turned to the right with the spray arm.
^First remove the bottom basket and then pull the lower spray arm off.
Particles in the lower spray arm are easier to rinse out if the cap is first opened.
^Open the cap in the direction of the arrow. After cleaning close up the cap again.
Important:
After replacing the spray arms check that they move freely.
41
