Programming special functions
6. Audible tone (Buzzer)
This special function allows you to programme a buzzer (lasting up to a maximum of 30 seconds) for the following functions:
–Programme end = Constant buzzer
–Fault warning = Buzzer at one second intervals
^Turn the programme selector to STOP f.
^Switch the machine off.
^Press and hold 4 and 6 at the same time, and whilst doing so switch the machine on with the
The current programme status “P...” appears in the display and the p / 6 indicator lights up.
^Press 3 once. E01 for programming level 1 will appear in the display.
^Turn the programme selector nine switch positions clockwise (9 o’clock position).
A number from 90 to 93 will appear in the display.
90 = buzzer switched off.
91 = buzzer at end of programme (standard setting)
92 = fault indication
93 = buzzer for all functions (at end of programme and for faults).
^Press 4 until the required function is displayed.
^Press 6. SP appears.
^Press 6 again. The change has been recorded.
Value set:
Note:
The buzzer can be switched off early by
–turning the programme selector to the STOP position f,
–interrupting the power supply (e.g. by opening and closing the door).
38
