Programming special functions
3.Delay start and setting the delay start time
The start of a wash programme can be delayed by up to 9 hours and 30 minutes in 30 minute stages.
Note:
Delay start should only be selected with the Universal and Intensive programmes. Because items in the machine stand for a longer period before being cleaned, residues can dry on if the start time is delayed. Shorter programmes may not be able to remove dried on soiling adequately.
a) To activate Delay Start
^Turn the programme selector to STOP f.
^Switch the machine off.
^Press and hold 4 and 6 at the same time, and whilst doing so switch the machine on with the
The current programme status “P...” appears in the display and the p / 6 indicator lights up.
^Press 3 once. E01 for programming level 1 will appear in the display.
^Turn the programme selector to 6. 80 or 81 will appear in the display. 80 = No delay start
81 = Delay start active.
^Press 4 to change from 80 to 81 or vice versa.
^Press 6. SP appears.
^Press 6 again. The change has been recorded.
Value set:
b) Setting the delay start period
The delay start period (from 30 minutes to 9 hours and 30 minutes) has to be set before a programme is started.
^After selecting a programme (see “Switching on”) Press the 4 button or hold it in until the required value is displayed. The “Delay Start” indicator light comes on.
After the START button 6 has been pressed the delay start period will count down in the display until the programme automatically starts.
34