Before using for the first time
Before using for the first time please pay special attention to the following points.
Detailed information on these points can be found in the relevant sections of these Operating Instructions.
Set the water softener unit
The water softener unit must be set for the water hardness level in your area.
The salt reservoir also has to be filled, first with water and then with reactivation salt.
,Filling the salt reservoir with cleaning agent by mistake will cause serious damage to the water softener. Please check every time before refilling that the package contains reactivation salt.
Add rinsing agent
,Inadvertently filling the reservoir for rinsing agent with cleaning agent (including liquid cleaning agents and washing up liquid) will cause serious damage to the reservoir.
Only use designated cleaning agents for special applications.
Do not use cleaning agents formulated for use in domestic dishwashers.
Load the machine carefully
Arrange the load so that water will come into contact with all surfaces. Concealed surfaces will not be cleaned.
The spray arms must not be blocked by any items.
Add cleaning agent
Follow the cleaning agent manufacturer’s recommendations on dosage.
The amount required will depend on the type of cleaning agent and the programme chosen.
Make sure you read the notes on dosing given in the programme chart.
Cleaning results may vary from brand to brand. If you are not satisfied with the results from one brand, try another quality brand before contacting Miele for advice.
The filter combination at the base of the wash cabinet and the spray arms must be kept clean.
Regular checking and cleaning is essential.
11
