Programming special functions
^Turn the programme selector back to the programme which needs to be changed. The actual value appears in the display after °C.
^Press 4 or hold it in, until the required value appears in the display.
^Final rinse temperature holding time:
Turn the programme selector to the STOP position f
(the programming level is only displayed in this switch position).
^Press 3 again, E06 for programming level 6 will appear in the display. Then:
^Turn the programme selector back to the programme which needs to be changed. The actual value appears in the display after min.
^Press 4 until the required value appears in the display.
^Having changed a value or all values:
^Press 6. SP appears.
^Press 6 again. The change has been recorded.
37