HP Phoneline Gateway hn200p manual Registering the phoneline gateway

registering the phoneline gateway

Make sure you register your product with HP after the installation process is complete. The registration option has been pre-selected for you. HP registration provides you with automatic notification of updates to the firmware installed on the Gateway and to the software installed on the PC.

If you choose to register your product at a later date, enter the following into the address window of your Web browser (such as Internet Explorer or Netscape): http://register.hp.com

Then press Enter.

6

connecting the phoneline USB network adapter (optional)

To provide you with an additional type of network cabling connection, a Phoneline USB Network Adapter is included in this kit. You can add the network adapter after you have installed the Phoneline Gateway and the first computer. You can use the network adapter to:

■Change the first computer to a phone line connection instead of an Ethernet connection.

■Connect the second (or any additional) computer to the network.

1To connect an additional computer, skip to step 2. To change the first computer to a phone line connection instead of an Ethernet connection, disconnect the Ethernet cable between the first computer and the Phoneline Gateway.

2Turn off the computer.

Filename: QS Phoneline GW.doc			Title: HP-Print2k.dot
Template: HP Quick Start.dot		Author: Rob Heiret		Last Saved By: Elizabeth Stoneburg
Revision #: 60	Page: 6 of 15		Printed: 08/16/01 05:39 PM