HP Stream - 14-z010ca, Stream - 14-z040wm manual Computer replacement procedures, Computer feet

4Removal and replacement procedures for Authorized Service Provider parts

Computer replacement procedures

This chapter provides removal and replacement procedures for Authorized Service Provider only parts.

CAUTION: This computer does not have user-replaceable parts. Only HP authorized service providers should perform the removal and replacement procedures described here. Accessing the internal part could damage the computer or void the warranty.

NOTE: Details about your computer, including model, serial number, product key, and length of warranty, are on the service tag at the bottom of your computer. See Locating the serial number, product number, and model number on page 3 for details.

NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions.

There are as many as 42 screws that must be removed, replaced, and/or loosened when servicing the computer. Make special note of each screw size and location during removal and replacement.

Computer feet

NOTE: The computer feet are included in the Rubber Kit, spare part number 784533-001.

Before replacing the computer feet, follow these steps:

1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect the power from the computer by unplugging the power cord from the computer.

3.Disconnect all external devices from the computer.

Remove the computer feet:

1.Close the computer.

2.Turn the computer upside down with the front toward you.

Computer replacement procedures 17