Solid-state drive (M.2)
Description | Spare part number |
|
|
128 GB | |
|
|
256 GB | |
|
|
512 GB | |
|
|
Before removing the
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the bottom cover (see Bottom cover on page 23).
5.Disconnect the battery (see Disconnecting the battery on page 25).
Remove the
1.Remove the Phillips PM2.0×3.5 screw (1) that secures the
2.Remove the
Reverse this procedure to install the
28 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts