![](/images/new-backgrounds/1285011/285011119x1.webp)
Recovering using HP Recovery Manager
HP Recovery Manager software allows you to recover the computer to its original factory state by using the HP Recovery media that you created or by using the HP Recovery partition (select models only). If you have not already created recovery media, see Creating HP Recovery media on page 52.
Using HP Recovery media, you can choose from one of the following recovery options:
●System
●Minimized Image Recovery (select models
●Factory
The HP Recovery partition (select models only) allows System Recovery and Minimized Image Recovery.
What you need to know
●HP Recovery Manager recovers only software that was installed at the factory. For software not provided with this computer, you must either download the software from the manufacturer's website or reinstall the software from the media provided by the manufacturer.
●Recovery through HP Recovery Manager should be used as a final attempt to correct computer issues.
●HP Recovery media must be used if the computer hard drive fails. If you have not already created recovery media, see Creating HP Recovery media on page 52.
●To use the Factory Reset option, you must use HP Recovery media. If you have not already created recovery media, see Creating HP Recovery media on page 52.
●If the HP Recovery media does not work, you can obtain recovery media for your system from support. See the Worldwide Telephone Numbers booklet included with the computer. You can also find contact information from the HP website. Go to http://www.hp.com/support, select your country or region, and follow the
IMPORTANT: HP Recovery Manager does not automatically provide backups of your personal data. Before beginning recovery, back up any personal data you wish to retain.
Using the HP Recovery partition (select models only)
The HP Recovery partition (select models only) allows you to perform a system recovery or minimized image recovery without the need for recovery discs or a recovery USB flash drive. This type of recovery can only be used if the hard drive is still working.
To start HP Recovery Manager from the HP Recovery partition:
1.Press f11 while the computer boots.
– or –
Press and hold f11 as you press the power button.
2.Select Troubleshoot from the boot options menu.
3.Select Recovery Manager, and then follow the
54 Chapter 8 Backing up, restoring, and recovering