HP X1040US, X1020US Create a Network Access connection, Close a Network Access connection

BTW User’s Guide

Configure

The Bluetooth Configuration Panel > Client Applications > File Transfer > General tab provides options to configure:

•The application name—To change it, highlight the existing name and enter the new name.

•Enable or disable secure connection—To enable secure connection, place a checkmark in the box.

3.5.10Network Access

Overview

The Bluetooth Network Access application makes it possible for this computer:

•To connect to a Local Area Network via a physical connection on a remote Bluetooth device.

or

•To connect to an ad hoc network provided by a remote Bluetooth device.

The type of network connection that is available is determined by the configuration of the remote Bluetooth device.

Create a Network Access connection

Establish a connection using one of these techniques:

•Windows system tray, Bluetooth icon

•From My Bluetooth Places

•Using the Bluetooth Setup Wizard

Close a Network Access connection

•If the connection was established via the Bluetooth icon in the Windows system tray: right-click the Bluetooth icon, select Quick Connect, Network Access and then select the device that is providing the service (active connections have a checkmark in front of them).

or

•No matter how the connection was created: In My Bluetooth Places, right-click the service name and select Disconnect.

Configure

The Bluetooth Configuration Panel > Client Applications > Network Access > General tab provides options to configure:

•The application name—To change it, highlight the existing name and enter the new name.

•Enable or disable secure connection—To enable secure connection, place a checkmark in the box.

WIDCOMMinc 17