![](/images/new-backgrounds/1319675/319675197x1.webp)
Communications
7.Select your modem > Properties button > Modem tab.
8.Clear the Wait For Dial Tone Before Dialing check box.
9.Select the OK button > OK button.
Accessing Communication Software
To access preinstalled modem software, including software for terminal emulation and data transfer, select Start > All Programs > Accessories > Communications, then select an application, wizard, or utility.
Finding AT Command Information
It is not necessary to use AT commands with most modem software. If you prefer to use AT commands, refer on the Documentation Library CD to:
■Modem Commands Guidelines (Advanced Users Only) for information about accessing HyperTerminal, identifying the modem model in your notebook, and using AT commands.
■The Lucent/Agere Command Set (Advanced Users Only) guide for the AT commands supported by a Lucent/Agere modem. If your notebook shipped with an internal modem, that modem supports the Lucent/Agere command set. For command updates and supplementary information about your Lucent/Agere modem, visit:
http://www.agere.com
The Lucent/Agere command set guide is provided on the Documentation Library CD in English only.
Startup and Reference |